2018 Exmark RAS708GEM60RC3
Call for Price
Exmark Radius S-Series delivers the cut quality and durability professionals demand at an unbeatable value.
The Radius rear discharge mower comes with a Series 4 UltraCut rear discharge deck. A 60" cut-width means you can cut more, quickly, while keeping clippings under control. Powered by Kohler ZT engines, with Hydro-Gear integrated transmissions and up to 9 mph fwd. ground speed. Radius S-Series improves productivity, but a operator seat with adjustable isolation technology and elastometric vibration control (EVC) means maximum comfort. (Photo is of 2017 model year. The 2018 Radius S-Series Rear Discharge mower is also equipped with suspension platform.)
- UltraCut Deck Technology: Exmark's exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark's exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
- Heavy Duty Unibody Frame: Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
- Quick Adjustable Rollover Protection System (ROPS): Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
- Fuel Gauge Window: Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
- Height of Cut Made Easy: The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
- Adjustable Isolation Technology: Designed to offer increased operator isolation from vibration and bumps, Exmark's exclusive adjustable seat isolation technology uses rubber isolation bumpers to suspend the operator seat above the chassis.
- Seat Flip-Up: Provides increased service access to fuel system and engine compartment or help keep the seating surface cool and dirt free when not in use.
- Radius Rear Discharge Deck: vailable in 60-inch cutting width, the rear-discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck—all while keeping the operator clean.
- Blade Spindles: No maintenance spindles and sealed and non-greasable. 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
- Drive Tires: 23 x 10.5-12 K500
- Cup Holder: Standard
- Tractor Frame: Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
- Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings
- Parking Brake: Lever-actuated pawl brake.
- Seat: High back seat with foam padded seat cushion, armrests and integral safety switch
- Electrical: 12-volt battery with 15-amp alternator.
- Engine Brand: Exmark
- Engine Model: 708
- Engine Displacement: 708
- Engine Series: V-Twin
- Engine Type: Carbureted
- Engine Speed: 3,600 rpm
- Air Filter: Donaldson Heavy Duty air cleaner
- Fuel Type: Gas Carbureted
- Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location.
- Fuel Indicator: Translucent Visual
- Drive: Hydro-Drive
- Drive Description: Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
- Speed: Infinitely variable speed selection from 0-9.0 mph (14.5 kmph) forward, 0-5.0 mph (8.0 kmph) reverse.
- Carb Compliant: No
- Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS: 2-post foldable ROPS standard with seat belt and latch.
- PTO Engagement: MagStop electromagnetic 125-ft-lb clutch
- Drive Wheel Release: Allows unit movement without engine running.
- Casters: .375" thick caster yoke arms
- Model Description: Radius S-Series 24.5 HP* Exmark 708CC w/60" UltraCut RD Deck, Susp Platform & Wide Pneum
- Width / Cutting Deck: 60"
- Deck Style: Floating Deck
- Deck Style Description: Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with option to mulch.
- Deck Construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
- Blade Tip Speed: Approximately 18,500 fpm.
- Cutting Heights: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
- Blades: 3 Blades at 20.50" Length
- Width: 66.0 in (167.6 cm)
- Length: 84.3 in (214.1 cm)
- Height: 70.2 inches (178.3 cm)
- Engine Manufacturer
- Engine Type
- Wheel Size
- 23 x 10.5-12 K500
- Fuel Capacity
- 7 gal. (26.5 L)
- Deck Size
- 60 in.